Page 1 of 1

Stream MPEG errors when EIT is enabled

Posted: Sat Apr 27, 2019 8:15 pm
by cubimol
When EIT is enabled, errors occur in the MPEG stream. Tvheadend server detects these errors and the 'Continuity Errors' counter goes up.

When EIT is disabled the errors in the MPEG stream end, and the 'Cotinuity Errors' counter of tvheadend server stops.

(Tested on XTi 3442 with firmware XTI_VJ.2.59.14 and tvheadend server 4.2.7-44)