Manual record programmation and power management

What do you want to see come next?
tarmacalastair
Posts: 61
Joined: Wed Mar 22, 2017 10:05 am

Re: Manual record programmation and power management

Post by tarmacalastair » Tue Apr 25, 2017 9:40 am

I presume a constant ping to the IP should stop after a couple of minutes when I try this?
Nothing seems to happen. The green lights on the Vbox remain on, the pings keep going and the browser page changes to this:
.
.
Selection_157.jpg
Selection_157.jpg (44.24 KiB) Viewed 251 times

tarmacalastair
Posts: 61
Joined: Wed Mar 22, 2017 10:05 am

Re: Manual record programmation and power management

Post by tarmacalastair » Tue Apr 25, 2017 1:02 pm

Looks like http://192.168.0.7/cgi-bin/ManageApp/ManageApp?OPTION=48&shutdown_action=Shutdown+System+

is what you meant as I then got this:

(exactly what I wanted, thanks
Attachments
Selection_159.jpg
Selection_159.jpg (46.19 KiB) Viewed 249 times

User avatar
admin@vbox
Site Admin
Posts: 148
Joined: Mon Jan 16, 2017 11:20 am

Re: Manual record programmation and power management

Post by admin@vbox » Fri Apr 28, 2017 6:50 am

tarmacalastair wrote:
Tue Apr 25, 2017 9:40 am
I presume a constant ping to the IP should stop after a couple of minutes when I try this?
Nothing seems to happen. The green lights on the Vbox remain on, the pings keep going and the browser page changes to this:
.
.
Selection_157.jpg
This page and message are for changing the IP address,
The two options allow you to set the new IP address settings now
Or you can delay changing the IP address setting to after a reboot (use this option if you are planning to install the VBox on a different network environment, so the next time you turn the VBox on it will use the new IP address settings)

User avatar
admin@vbox
Site Admin
Posts: 148
Joined: Mon Jan 16, 2017 11:20 am

Re: Manual record programmation and power management

Post by admin@vbox » Fri Apr 28, 2017 6:52 am

tarmacalastair wrote:
Tue Apr 25, 2017 1:02 pm
Looks like http://192.168.0.7/cgi-bin/ManageApp/ManageApp?OPTION=48&shutdown_action=Shutdown+System+

is what you meant as I then got this:

(exactly what I wanted, thanks
I'm happy it helped

seb-esperanto
Posts: 1
Joined: Thu Aug 31, 2017 12:01 pm

Re: Manual record programmation and power management

Post by seb-esperanto » Thu Aug 31, 2017 12:05 pm

+1 for NFS support ;)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest