Page 2 of 3

Re: Manual record programmation and power management

Posted: Tue Apr 25, 2017 9:40 am
by tarmacalastair
I presume a constant ping to the IP should stop after a couple of minutes when I try this?
Nothing seems to happen. The green lights on the Vbox remain on, the pings keep going and the browser page changes to this:
.
.
Selection_157.jpg
Selection_157.jpg (44.24 KiB) Viewed 1040 times

Re: Manual record programmation and power management

Posted: Tue Apr 25, 2017 1:02 pm
by tarmacalastair
Looks like http://192.168.0.7/cgi-bin/ManageApp/ManageApp?OPTION=48&shutdown_action=Shutdown+System+

is what you meant as I then got this:

(exactly what I wanted, thanks

Re: Manual record programmation and power management

Posted: Fri Apr 28, 2017 6:50 am
by admin@vbox
tarmacalastair wrote:
Tue Apr 25, 2017 9:40 am
I presume a constant ping to the IP should stop after a couple of minutes when I try this?
Nothing seems to happen. The green lights on the Vbox remain on, the pings keep going and the browser page changes to this:
.
.
Selection_157.jpg
This page and message are for changing the IP address,
The two options allow you to set the new IP address settings now
Or you can delay changing the IP address setting to after a reboot (use this option if you are planning to install the VBox on a different network environment, so the next time you turn the VBox on it will use the new IP address settings)

Re: Manual record programmation and power management

Posted: Fri Apr 28, 2017 6:52 am
by admin@vbox
tarmacalastair wrote:
Tue Apr 25, 2017 1:02 pm
Looks like http://192.168.0.7/cgi-bin/ManageApp/ManageApp?OPTION=48&shutdown_action=Shutdown+System+

is what you meant as I then got this:

(exactly what I wanted, thanks
I'm happy it helped

Re: Manual record programmation and power management

Posted: Thu Aug 31, 2017 12:05 pm
by seb-esperanto
+1 for NFS support ;)

Re: Manual record programmation and power management

Posted: Tue Apr 03, 2018 12:42 pm
by Dr. H
+1 for sleep mode with WOL and auto wake-up for timer recording.

Do you have an ETA for this? I note your last software update was almost a year ago (2.57 released May 2017).

Re: Manual record programmation and power management

Posted: Tue Apr 03, 2018 1:02 pm
by VBsupport
hello Dr.H

we currently provide fw 2.58 .

please contact us trough our support if you wish to receive it and LET US KNOW if its vb version or vj.

Re: Manual record programmation and power management

Posted: Tue Apr 03, 2018 1:16 pm
by Dr. H
VBsupport wrote:
Tue Apr 03, 2018 1:02 pm
we currently provide fw 2.58 .
Does it have standby?

Re: Manual record programmation and power management

Posted: Tue Apr 03, 2018 3:18 pm
by nepo
hi
and LET US KNOW if its vb version or vj
What is the difference between vb and vj ?
I have SWUpdate__XTI_VJ.2.58, should I ask for vb version ?

Bye nepo

Re: Manual record programmation and power management

Posted: Wed Apr 04, 2018 8:38 am
by VBsupport
Hi Napo
this are different SW types for the 3442-3342 devices
VJ- for the new devices of 3442-3452
VB -for old devices of 3342-3352