Page 2 of 2

Re: Manual record programmation and power management

Posted: Tue Apr 25, 2017 9:40 am
by tarmacalastair
I presume a constant ping to the IP should stop after a couple of minutes when I try this?
Nothing seems to happen. The green lights on the Vbox remain on, the pings keep going and the browser page changes to this:
.
.
Selection_157.jpg
Selection_157.jpg (44.24 KiB) Viewed 200 times

Re: Manual record programmation and power management

Posted: Tue Apr 25, 2017 1:02 pm
by tarmacalastair
Looks like http://192.168.0.7/cgi-bin/ManageApp/ManageApp?OPTION=48&shutdown_action=Shutdown+System+

is what you meant as I then got this:

(exactly what I wanted, thanks

Re: Manual record programmation and power management

Posted: Fri Apr 28, 2017 6:50 am
by admin@vbox
tarmacalastair wrote:
Tue Apr 25, 2017 9:40 am
I presume a constant ping to the IP should stop after a couple of minutes when I try this?
Nothing seems to happen. The green lights on the Vbox remain on, the pings keep going and the browser page changes to this:
.
.
Selection_157.jpg
This page and message are for changing the IP address,
The two options allow you to set the new IP address settings now
Or you can delay changing the IP address setting to after a reboot (use this option if you are planning to install the VBox on a different network environment, so the next time you turn the VBox on it will use the new IP address settings)

Re: Manual record programmation and power management

Posted: Fri Apr 28, 2017 6:52 am
by admin@vbox
tarmacalastair wrote:
Tue Apr 25, 2017 1:02 pm
Looks like http://192.168.0.7/cgi-bin/ManageApp/ManageApp?OPTION=48&shutdown_action=Shutdown+System+

is what you meant as I then got this:

(exactly what I wanted, thanks
I'm happy it helped

Re: Manual record programmation and power management

Posted: Thu Aug 31, 2017 12:05 pm
by seb-esperanto
+1 for NFS support ;)