How to auto start the v-box

Live TV, EPG, Recordings, Pay TV CAM, Remote Access and other issues
Post Reply
crown
Posts: 3
Joined: Fri Mar 16, 2018 9:34 am

How to auto start the v-box

Post by crown » Fri Mar 16, 2018 10:16 am

Hello,

i just ordered the v-box. I will be placing the v-box to a ventilated wall box where it is hard to get to it. (I can turn on/off the electricity to the wall box)
If i "shut down" the v-box via the web browser, how do i turn it back on? I cannot physically touch the device.

Thanks
Filip

Tags:

nepo
Posts: 44
Joined: Mon Dec 11, 2017 7:50 am

Re: How to auto start the v-box

Post by nepo » Fri Mar 16, 2018 2:00 pm

hi
how do i turn it back on? I cannot physically touch the device
You can't do it automatically, only by pushing the power switch button off and then on. You can use remote-controlled sockets.

Bye nepo
vbox xti 3442 (cable) version 2.58 with usb device
Raspberry/Raspbian with Kodi 17, Mobil with Android 7, Amd64 Ubuntu16.4

crown
Posts: 3
Joined: Fri Mar 16, 2018 9:34 am

Re: How to auto start the v-box

Post by crown » Sat Mar 17, 2018 10:10 pm

Would it start the box if i remotely turn electricity off and then on again?

THanks

User avatar
admin@vbox
Site Admin
Posts: 295
Joined: Mon Jan 16, 2017 11:20 am

Re: How to auto start the v-box

Post by admin@vbox » Sun Mar 18, 2018 8:35 am

Yes it will

nepo
Posts: 44
Joined: Mon Dec 11, 2017 7:50 am

Re: How to auto start the v-box

Post by nepo » Sun Mar 18, 2018 2:54 pm

hi
if i remotely turn electricity off and then on again
Yes it will
But if you only turn electricity off and then on without shutdown the vbox, perhaps it can be damaged the system or leads to loss data like any other computer.
vbox xti 3442 (cable) version 2.58 with usb device
Raspberry/Raspbian with Kodi 17, Mobil with Android 7, Amd64 Ubuntu16.4

User avatar
bloodroses
Posts: 5
Joined: Thu Aug 10, 2017 11:22 pm
Contact:

Re: How to auto start the v-box

Post by bloodroses » Tue Mar 20, 2018 6:11 am

To remotely power on or off the system use a Wifi Remote Control Outlet Power Strip. Power off the system in the administration page and after that wait a minute and after power of remotely the electricity.
that's all.

crown
Posts: 3
Joined: Fri Mar 16, 2018 9:34 am

Re: How to auto start the v-box

Post by crown » Wed Mar 21, 2018 8:33 am

thank you, this helps. :-)

Post Reply